Article Number 60858

Water-Drops® “easy” 150 g

150 g, for approx. 160 ml

Out of stock
This product is suitable for scale
  • 1:22,5
  • 1:35
  • 1:43 (0)
  • 1:45
  • 1:50
  • 1:72
  • 1:76
  • 1:87 (H0)
  • 1:100
  • 1:120 (TT)
  • 1:144
  • 1:160
  • 1:200
  • 1:220 (Z)
  • 15 mm
  • 1:225
  • 28-32 mm
Note: Model building item
€15.49 €10.33 / 100 g Incl. 19% VAT, Excl. shipping
  •  Current delivery time approx. 4 - 7 working days
  •  No minimum order value

To know every trick in the book! Water-Drops® easy

With the simple application of "Melting & Casting" the Water-Drops® have revolutionized the tinkering of realistic model waters. Water-Drops® easy makes the construction of lakes and rivers even easier. The cup is made of a heat-resistant plastic and is thus at the same time the melting vessel. Simply remove the lid and melt the Water-Drops® easy in the oven at 150 ° C.

The melted Water-Drops® easy are then poured into the prepared lake or stream and harden completely within a few minutes. If you do not use the full amount of model water, then simply let the Liquid Water-Drops® cool down in the cup and store the art water in your hobby room until the next application. The Water-Drops® can be melted and reused as often as you like. Really practical!

  • Additional Information

    EAN 4007246608584
    Content 150 g
    Weight 170 g
  • Video

  • How-to tip

    The Water-Drops® are simply melted in the oven in a heat-resistant container (eg jam jar). After melting the drops, the material stays in a syrupy consistency for about 3 minutes. Now it can be poured into the prepared brook or lake bed.

    If the water has hardened on your model landscape and you want more changes to the water surface - no problem: With a hairdryer, you can melt the surface anytime and post-processing. With a hot air gun, you can even liquefy the entire Water-Drops® waters. A standard hair dryer is ideal for working out waves or rapids afterwards.

    Important note: Stir well the molten Water-Drops® with a metallic object (eg screwdriver or old spoon). Stirring completely combines the plasticizer with the Water-Drops®.

You may also be interested in the following product(s)