Article Number 6012631

Water-Drops "Color"

250 g transparent
25 g each blue, green, brown

  • Easy processing
  • Speedy work (short curing time)
  • Simply colorizeRework possible by heating
This product is suitable for scale
  • 1:22,5
  • 1:35
  • 1:43 (0)
  • 1:45
  • 1:50
  • 1:72
  • 1:76
  • 1:87 (H0)
  • 1:100
  • 1:120 (TT)
  • 1:144
  • 1:160
  • 1:200
  • 1:220 (Z)
  • 15 mm
  • 1:225
  • 28-32 mm
Note: Model building item
€19.99 €5.33 / 100 ml Incl. 19% VAT, Excl. shipping
  •  Current delivery time approx. 4 - 7 working days
  •  No minimum order value

Two things make the Water-Drops® in the water-shaping indispensable: The simple processing. As well as the opportunity to make by heating subsequently details such as waves or rapids. As a product family - the Water-Drops® are available in three versions: 1. the Water- Drops® are transparent ideal to make crystal clear lakes, rivers and streams. For the color design of the underground waters, we recommend the basic color set (art. No. 60875 of NOR). 2. the Water-Drops® color in addition to the transparent Drops for mixing and blue, green and brown Drops. How to personalize your own individual water color. 3. the Water-Drops® easy. Simply remove the cover and put the mug of heat-resistant plastic in the oven and melt.

Finally, a tip: If you are looking for the ideal entry into the world of water-design with the Water-Drops®, we recommend you the water-Set PROFI (Item No. 60814 of NOR), which includes all necessary products that are necessary for water design.

The Water-Drops® are an ideal material for the simulation of stationary and flowing water in the model. In particular, the opportunity to melt the water again after curing (for example, with a strong hairdryer), which opens up many possibilities for the modeller. Because of that you are able to model subsequently waves later on or remove scratches from the water surface. We offer the Water-Drops® in the variants "transparent" and "color" or "easy".

  • Additional Information

    EAN 4007246126316
    Content 375 ml
    Weight 376 g
    Width 120,00 mm
    Length 150,00 mm
    Height 50,00 mm


  • Video

  • How-to tip

    The Water-Drops® be melted easily in the oven in a heat-resistant container (eg. B. jam jar). After melting of the drops, the material remains for approximately 3 minutes in a syrupy consistency. Now it can be poured into the prepared stream or lake bed.Is this water cured on your model landscape and you want more changes to the water surface - no problem: With a hairdryer you can melt the surface at any time and edit. With a hot air gun you can even liquefy the entire Water-Drops® waters. A commercial hair dryer is ideal to subsequently draw waves or rapids.

You may also be interested in the following product(s)