The overall production of artificial water and the design of model waters is one of the biggest challenges for the model landscapers. 2K Water Gel is a two-component material, mixed in the ratio of 1: 1. Both lakes and rivers as well as streams and ponds can be realized fascinating real with this very easy to edit material. Put both bottles of the components for about 15 minutes at 50-60 ° C in a warm water bath (better fluidity) and then stirr well both in the ratio 1: 1! (Do not hit otherwise blistering)
VERY IMPORTANT: Stir the two components extremely thorough. Both components must be completely mixed together! Please forget not the border area and the bottom of the mixing vessel. After mixing, the 2K-water gel is thin, after about 30 minutes it is looks like honey after about 60 minutes it is getting thick and viscous after approximately 90 minutes. In order to that the 2K-Water Gel is ideal for the design of water supplies in the model.
2K Water Gel pour within the first 30 minutes after mixing. With a flat brush you distribute the casting and smooth out all resulting bubbles. You repeat this process several times until you get a mirror-like surface (Figure 3).
Pour 2K Water Gel after about 30 to 60 minutes and spread with a brush to remove air pockets.
Streams in Slope:
Bring the 2K Water Gel in the viscous state after about 90 to 120 minutes with a brush on your model.
2K Water Gel is cured completely scratch and dust resistant after about 18 hours. Blanket your water models during this time in order to avoid contamination by dust. 2K Water Gel can be applied to materials such as wood, plaster, styrofoam, metal, glass, ceramic and polystyrene (ZITERDES Modular Gaming Table).The cured 2K Water Gel is water and weather resistant and acid and alkali resistant.